Billing support available 24/7 for US practices

SNF Type of Bill: Avoid 6 Costly UB-04 Coding Mistakes

Skilled Nursing BillingBy Muhammad IbrahimPublished Nov 17, 202611 min read
In this article
  1. What Is the SNF Type of Bill?
  2. SNF Type of Bill Codes List
  3. Which SNF Type of Bill to Use: Month-by-Month Example
  4. Required Codes on a SNF Claim
  5. How to Build a SNF Part A Claim: 7 Steps
  6. SNF Type of Bill 0210: No-Pay, Demand and Benefits-Exhaust Claims
  7. SNF Part B Type of Bill (022X/023X) and Consolidated Billing
  8. Common Mistakes and Denials
  9. Texas Note: Medicaid Nursing Facility Claims Are Different
  10. Key Takeaways
  11. FAQs
  12. Get the SNF Type of Bill Right on Every Claim
  13. Sources
SNF type of bill codes 0211, 0212, 0213 and 0214 on the UB-04

The SNF type of bill is the first thing a Medicare system reads on a skilled nursing UB-04, and one wrong digit can stall a whole month of Part A revenue. Bill 0212 when it should be 0213, send November before October, or forget the span code 70 dates, and the claim comes back as a return to provider (RTP). On the SNF claims we review, these small coding slips cause more delays than any clinical issue.

This guide lists every SNF type of bill code, shows which one to use month by month, and covers the other codes a clean SNF claim needs.

Quick Answer

A Medicare Part A SNF stay uses type of bill 021X: 0211 for a full stay (admit through discharge), 0212 for the first monthly claim, 0213 for continuing months and 0214 for the last claim. Use 0210 for no-pay, demand and benefits-exhaust bills, and 022X/023X for Part B. Bill monthly, in order.

Table of Contents

  1. What Is the SNF Type of Bill?
  2. SNF Type of Bill Codes List
  3. Which SNF Type of Bill to Use: Month-by-Month Example
  4. Required Codes on a SNF Claim
  5. How to Build a SNF Part A Claim: 7 Steps
  6. SNF Type of Bill 0210: No-Pay, Demand and Benefits-Exhaust Claims
  7. SNF Part B Type of Bill (022X/023X) and Consolidated Billing
  8. Common Mistakes and Denials
  9. Texas Note: Medicaid Nursing Facility Claims Are Different
  10. Key Takeaways
  11. FAQs
  12. Sources

What Is the SNF Type of Bill?

The type of bill (TOB) is a four-digit code in form locator (FL) 4 of the UB-04, or in CLM05 on the electronic 837I. It tells Medicare three things about the claim:

  • Digit 1 (0): a leading zero on the four-digit form.
  • Digits 2–3 (21, 22, 23, 18): the type of facility and the type of care. 21 is SNF inpatient Part A, 22 is SNF inpatient Part B, 23 is SNF outpatient, and 18 is a hospital swing bed.
  • Digit 4 (frequency): where this claim sits in the stay. This is the digit that changes most on a SNF type of bill. 1 = admit through discharge, 2 = first interim claim, 3 = continuing interim claim, 4 = last interim claim, 0 = non-payment claim, 7 = replacement, 8 = cancel.

So the SNF type of bill 0213 reads: SNF, inpatient Part A, continuing claim. Many billing systems and MAC pages drop the leading zero and show it as 213. It’s the same code.

The rules in this guide come from Noridian JE Part A, “SNF and Swingbed Billing,” the CMS Medicare Claims Processing Manual, Chapter 6, and First Coast’s SNF no-payment claims guidance. Some MAC pages still show RUG-era examples, so we’ve updated those points for PDPM.

SNF Type of Bill Codes List

Type of bill Name When to use it
0211 Admit through discharge The whole Part A stay fits on one claim (admitted and discharged in the same month)
0212 Interim – first claim First month of a stay that continues into the next month
0213 Interim – continuing claim Every full month in the middle of a stay
0214 Interim – last claim The month the stay ends (discharge, death or drop to a non-skilled level)
0210 Non-payment claim No-pay bills, demand bills and benefits-exhaust claims finalized as non-payment
0217 Replacement claim Correcting a processed claim (for example, a HIPPS change after an MDS correction)
0218 Void/cancel Cancelling a claim that shouldn’t have been billed
022X SNF inpatient Part B Part B services (therapy, lab) for a resident not in a covered Part A stay
023X SNF outpatient Part B Outpatient services billed by the SNF
0181–0184, 0180 Hospital swing bed The swing bed version of 0211–0214 and 0210

For 022X and 023X, the last digit follows the same frequency rules as above. [VERIFY: frequency digits used on SNF Part B claims — CMS Claims Processing Manual Ch. 6 / your MAC]

Watch Out: Swing beds don’t have a Part B SNF type of bill. Noridian says to switch back to the hospital inpatient Part B 012X type of bill, using the hospital’s provider number.

SNF type of bill codes list for Medicare Part A and Part B

Which SNF Type of Bill to Use: Month-by-Month Example

Medicare wants each SNF type of bill 021X claim monthly, or sooner at discharge, death or a drop below a skilled level of care. The claims for one continuous stay must be sent in order. These dates are illustrations, not real patients.

Resident Claim period SNF type of bill Why
Resident A (admitted Oct 10, discharged Dec 5) Oct 10 – Oct 31 0212 First claim of a stay that continues
Resident A Nov 1 – Nov 30 0213 Full middle month
Resident A Dec 1 – Dec 5 0214 Last claim; discharge month
Resident B (admitted Oct 3, discharged Oct 20) Oct 3 – Oct 20 0211 Whole stay in one month
Resident C (benefit days used up, still in a certified bed) Following month 0210* No Part A days left to pay

*Benefits-exhaust claims are sent with the regular 021X frequency digits, and Medicare changes the finalized claim to 0210. [VERIFY: benefits-exhaust TOB your MAC expects on submission — MAC billing guide]

Noridian also allows one exception: if a resident is admitted on the last day of a month, or discharged on the first day of the next, you can combine those two months on one claim.

SNF type of bill month-by-month example: 0212, 0213, 0214

Pro Tip: Hold the 0213 claim until the 0212 claim for the same stay has processed. Sending them out of order is one of the fastest ways to get an RTP.

Getting SNF claims back as RTPs?

Our skilled nursing facility billing services check bill type, HIPPS and span codes before every claim goes out.

Book a Free Billing Review

Required Codes on a SNF Claim

The SNF type of bill only works if the rest of the UB-04 matches it. These are the main codes Noridian lists for SNF Part A claims:

Code type (UB-04 field) Code What it means
Revenue code (FL 42) 0022 SNF PPS line; a HIPPS code is required on every 0022 line
Revenue code 0120 Room and board
Revenue code 0180 Leave of absence days
Revenue code 0420 / 0430 / 0440 PT / OT / SLP therapy [VERIFY: PDPM therapy reporting — CMS Ch. 6]
Revenue code 0001 Total charges
Occurrence code (FL 31–34) 50 Assessment reference date (ARD) of the MDS
Occurrence code 22 Date active care ended (drop below skilled care)
Occurrence code A3 Benefits exhausted (added by the system)
Occurrence span code (FL 35–36) 70 Qualifying 3-day hospital stay dates
Occurrence span code 74 / 77 / 78 Leave of absence / provider-liable days / prior SNF stay
Value code (FL 39–41) 09 Coinsurance amount for coinsurance days
Condition code (FL 18–28) 04 Medicare Advantage enrollee
Condition code D2 / D9 HIPPS change from an MDS correction / other change (on 0217)

[VERIFY: UB-04 form locator numbers — NUBC UB-04 manual]

For more on the 0022 line and HIPPS codes, see our revenue code 0022 guide and our PDPM HIPPS code guide.

Required revenue, occurrence, span and condition codes on a SNF claim

How to Build a SNF Part A Claim: 7 Steps

  1. Confirm the MDS was accepted. Noridian says the MDS must be submitted successfully before you bill. Under PDPM, a claim without a valid assessment uses the default HIPPS code ZZZZZ.
  2. Pick the SNF type of bill. Use 0211, 0212, 0213 or 0214 based on where the claim sits in the stay.
  3. Enter the 0022 lines. Add one line per HIPPS code with the covered days, and put the ARD in occurrence code 50.
  4. Add room and board and ancillary lines. Revenue code 0120, therapy lines if required, and any other ancillary charges, ending with 0001.
  5. Add occurrence span code 70 with the qualifying hospital stay dates. See our SNF 3-day rule guide.
  6. Add value code 09 for coinsurance days. Medicare’s coinsurance for days 21–100 is $217 a day in 2026 (CMS MLN MM14279). [VERIFY: 2027 SNF coinsurance — CMS, when published]
  7. Check condition codes, then submit in order. Add 04 for MA enrollees and any other condition codes, and send the claims for each stay in date order.

SNF Type of Bill 0210: No-Pay, Demand and Benefits-Exhaust Claims

SNF type of bill 0210 is the non-payment claim. All days and charges on it are non-covered. You use it in three situations:

  • No-pay bills: First Coast says SNFs must submit no-payment bills for residents who dropped to a non-skilled level of care but stay in a Medicare-certified bed. Keep billing them until discharge or until the resident leaves the certified bed. They aren’t required for residents admitted at a non-skilled level.
  • Demand bills: when the resident disagrees with your non-coverage decision and asks you to bill Medicare anyway.
  • Benefits exhaust: when the resident has used all 100 SNF days in the benefit period but remains in a certified bed.

Condition codes: First Coast lists condition code 21 as “billing for denial,” used on no-pay bills. Condition code 20 is the code for a beneficiary-requested (demand) bill. [VERIFY: condition code 20 vs 21 use — CMS Claims Processing Manual Ch. 6 §40.8 / NUBC]

A no-pay claim still needs a HIPPS line. First Coast says to use the default ZZZZZ with the room and board revenue code, and patient status 30 if the resident is still in the facility.

SNF Part B Type of Bill (022X/023X) and Consolidated Billing

When a resident isn’t in a covered Part A stay, some services can still be billed to Part B on SNF type of bill 022X:

  • Therapy (revenue codes 042X, 043X, 044X) and lab (030X) for residents in a non-covered stay.
  • Part B therapy and lab claims are billed monthly.
  • Noridian says inpatient Part B claims can’t be sent at the same time as demand bill or benefits-exhaust claims.

During a covered Part A stay, most services are bundled into the SNF payment under consolidated billing. Outside suppliers and labs bill the SNF, not Medicare. See our SNF consolidated billing guide for the excluded services.

Common Mistakes and Denials

These are the SNF type of bill problems we see most often. Reason codes vary by MAC, so check your own remits and the claim’s reason code in the MAC portal.

Mistake What you’ll see How to fix it
Wrong frequency digit (0212 vs 0213) or claims sent out of order RTP Match the digit to the claim’s place in the stay; send claims in date order.
Missing or invalid HIPPS; MDS not accepted RTP, or paid at the default ZZZZZ rate Confirm the MDS was accepted, then send a 0217 adjustment with D2.
Missing span code 70 Claim rejected (no qualifying stay) Add the qualifying stay dates; see our SNF 3-day rule guide.
HIPPS increase sent more than 120 days after the through date Adjustment not allowed Send HIPPS increases within 120 days. Decreases can be sent later to refund Medicare.
Wrong coinsurance in value code 09 RTP or CO-16; wrong PR-2 amount [VERIFY] Use the current year’s daily coinsurance × coinsurance days.
Part B billed during a covered Part A stay Consolidated billing edit; e.g. CO-109 [VERIFY] Bill the SNF, or move the service to the 021X claim.

To fix a processed claim, use SNF type of bill 0217 with the right condition code. Our claim frequency code 7 guide explains how. For more prevention steps, read how to reduce claim denials.

Texas Note: Medicaid Nursing Facility Claims Are Different

The SNF type of bill rules above are Medicare rules. Texas Medicaid nursing facility claims, including STAR+PLUS, follow TMHP and HHSC billing rules, which use their own forms and requirements. [VERIFY: Texas Medicaid nursing facility claim form and TOB — TMHP / HHSC nursing facility billing guide]

For dual-eligible residents, the Medicare Part A claim comes first. Medicaid then picks up the coinsurance and the days after Medicare ends. Our Austin medical billing team handles both sides for Texas facilities.

Key Takeaways

  • SNF Part A uses type of bill 021X: 0211 full stay, 0212 first, 0213 continuing, 0214 last.
  • Use 0210 for no-pay, demand and benefits-exhaust claims.
  • Use 022X/023X for SNF Part B; swing beds use the hospital 012X for Part B.
  • Bill monthly, and send claims for one stay in order.
  • Every 0022 line on a SNF type of bill 021X claim needs a HIPPS code; the ARD goes in occurrence code 50.
  • Fix processed claims with 0217; HIPPS increases within 120 days.

FAQs

What is the type of bill for a skilled nursing facility?

A Medicare Part A SNF stay uses type of bill 021X. The last digit shows where the claim sits in the stay: 0211 for a full stay on one claim, 0212 for the first claim, 0213 for continuing claims and 0214 for the last claim. Part B services use 022X or 023X.

What is the difference between TOB 0211, 0212, 0213 and 0214?

0211 covers a whole stay from admission to discharge on one claim. For longer stays billed monthly, 0212 is the first claim, 0213 is each continuing month and 0214 is the last claim, sent when the resident is discharged, dies or drops below a skilled level of care.

When do I use type of bill 0210?

Use 0210 for SNF non-payment claims: no-pay bills for residents who dropped to a non-skilled level of care but stay in a certified bed, demand bills the resident asked for, and benefits-exhaust claims. All days and charges on a 0210 claim are non-covered.

How often does a SNF bill Medicare Part A?

Monthly, or sooner when the resident is discharged, dies or drops below a skilled level of care. Claims for one continuous stay must be sent in date order. Noridian allows combining two months when a resident is admitted on the last day of a month or discharged on the first day.

What revenue codes go on a SNF claim?

The main ones are 0022 for the SNF PPS lines (with a HIPPS code on each), 0120 for room and board, 0180 for leave of absence days, therapy codes 0420, 0430 and 0440 where required, and 0001 for total charges. Ancillary services like lab use their own revenue codes.

What is occurrence code 50 on a SNF claim?

Occurrence code 50 reports the assessment reference date (ARD) of the MDS assessment that set the HIPPS code. It ties each 0022 line to the right assessment. If the ARD on the claim doesn’t match the accepted MDS, the claim can be returned.

What type of bill is used for SNF Part B?

SNFs bill Part B services on type of bill 022X (inpatient Part B, for residents not in a covered Part A stay) or 023X (outpatient). Swing beds have no SNF Part B type of bill; they use the hospital’s inpatient Part B type of bill 012X.

Get the SNF Type of Bill Right on Every Claim

The SNF type of bill sets the frame for the whole UB-04: pick the right frequency digit, send claims in order and back them up with the right HIPPS, occurrence and span codes. Our skilled nursing facility billing team builds every UB-04 with the right bill type and codes before it goes out. Book a free billing review.

This article is for education only. Confirm current rules with CMS, NUBC and your Medicare Administrative Contractor before you bill.

Sources

Last updated: November 2026.

Need help with medical coding? Complete clinical coding with in-depth expertise in ICD-10, CPT and modifiers for accurate, compliant claims.

Written by

Muhammad Ibrahim

Published

Related articles

View all articles